Welcome to Würth Latvia For trade customers only

ASSY® 3.0, blue galvanised Particle board screw

ASSY steel zinc plated FT countersunk head AW
ASSY COUNT.SUNK CHP BRD SCR ZN 5X60
ASSY

Art.-no. 01515 60
EAN 4011231205238

Prices for customers after login
ASSY® 3.0, blue galvanised Particle board screw

Art.-no. 01515 60

Prices for customers after login
Quantity
PU
x 250 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Universal use in furniture construction, carpentry, shopfitting and interior fittings.

Galvanised steel, blue coated, full thread, countersunk head, AW drive


Joins wood instead of splitting it



AW drive for more power


  • Optimal force transmission

  • Excellent fit

  • Rapid finding

  • Screw settles securely

  • Virtually no unscrewing of bit

  • No wobbling

  • No damage to surface coating of screw

  • Only 5 bit sizes for diameters 3.0 to 12.0 mm



Shank milling cutter – the "auxiliary motor" for low force


  • Reduction of the screw-in and head countersinking torque, especially with long screws

  • Gentle on your tools

  • From Ø = 5 mm, L = 70 mm

Asymmetric thread — faster speed


  • Low screw-in torque

  • High over-turning force

  • Faster screwing than conventional particle board screws


Ring/mating thread — less tendency of the wood to split, very few blow-outs


  • Low splitting forces, in particular when screwing close to edges

  • Reduction of screw-in torque

  • Punch effect of ring thread largely prevents blow-outs

  • Ring thread: 3.0–4.5 mm

  • Mating thread: 5.0–12.0 mm
NoticeThe screws are not suitable for outdoor use and for rooms subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases. Use Würth timber construction software to measure the ASSY screws with a diameter of more than 5mm. To attach metals to wood, bradawl a precise cutout in the metal tab. ASSY 3.0 particle board screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drilling tip, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix 0151 (countersunk head) and prefix 0153 (pan head).
ETA-11/0190 When using these screws, please follow ETA-11/0190 specifications.
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application areaUniversal use in furniture construction and carpentry to screw two components made from wood or metal into wood.
InstructionsScrew-in angle 0° to 90°. For coniferous wood or wood-based materials made from softwood, make the fitting without a bradawl. To reduce the edge distances make a predrilled hole according to the core diameter. When screwing into hardwood, drill according to ETA-11/0190.

Nominal diameter (d)

5 mm

Length (l)

60 mm

Internal drive

AW25

Material

Steel

Surface

Zinc plated

Product weight (per item)

5.258 g

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information