Adhesive lubricant HHS<SUP>®</SUP>100 - ADHLUB-HHS100-400ML

Adhesive lubricant HHS<SUP>®</SUP>100 - ADHLUB-HHS100-400ML - 1

Adhesive lubricant HHS<SUP>®</SUP>100 - ADHLUB-HHS100-400ML - 2

Adhesive lubricant HHS^®100

Name: Adhesive lubricant HHS ® 100
Brand: Würth
SKU: 08931066

Adhesive lubricant HHS 100
ADHLUB-HHS100-400ML
HHS

Art.-no. 08931066

EAN 4045989911684

All versions

Similar products

Prices for customers after login

Adhesive lubricant HHS^®100

Art.-no. 08931066

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +371 67788996

Shear-proof dry synthetic wax with PTFE

Dry synthetic wax

Lubricant does not shear on fast-rotating and rotating parts

Low adhesion of dust

Excellent corrosion protection

Outstanding creep and gap penetration characteristics

Lubricates hard-to-reach areas

Penetrates even the smallest gaps

Protects against "sagging"

Contains PTFE solid lubricant

Good emergency running property and temperature resistance.

Excellent material compatibility

Protects and maintains O-rings and X-rings

Compatible with plastic

Neutral behaviour with painted surfaces

Resistant to spray water and salt water, weak acids and bases

Free from silicone, resin and acids

NoticeThis product is not subject to the viscosity classification. Shortly after being sprayed on, the product forms a highly effective, wax-based dry lubricating film, thereby ensuring optimum corrosion protection.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application areaShear-proof dry synthetic wax with PTFE and exceptionally good creep properties.

InstructionsShake can well before use. Thoroughly pre-clean the points to be lubricated with HHS® CLEAN, art. no. 0893 106 10. Then spray evenly on the clean surface from a distance of 20-30 cm.

Chemical basis	Synthetic wax oxidant
Oil basis	Synthetic wax
Colour	Yellow Brown
Smell/fragrance	Characteristic
Density	0.714 g/cm³
Min. temperature conditions	-30 °C
Max. temperature conditions	100 °C
Min. flashing point	130 °C
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Salt water Weak lyes Weak acids Splash
Pour point	-20 °C
Contents	400 ml
Shelf life from production	24 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.