Welcome to Würth Latvia For trade customers only

Assortment of specially fused alumina sanding tips, pink 10 pieces

Sanding tip assortment
SNDTIP-SORT-COARSE-10PCS

Art.-no. 068010
EAN 4011231558419
Prices for customers after login
Assortment of specially fused alumina sanding tips, pink 10 pieces

Art.-no. 068010

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
  • Long service life and low tool wear thanks to a wear-resistant grain and a tough bond that retains its shape.

  • High edge stability for economic use on low-speed drive motors.
Notice

Wear appropriate protective equipment when using the sanding tip, such as eye protection, hearing protection, a dust mask and protective gloves. Please note the recommended rotation speed (n) and cutting speed (Vc) for the material being processed as well as the tool/material assignments in the overview tables. When using the drive spindle extensions, the specified rotation speeds and cutting speeds must be significantly reduced to prevent the shaft from bending. This is a matter of safety. Before using the sanding tip, please ensure that the tip rotates properly and that the clamping function on the tool drive works correctly. Regardless of the length of the shaft on the tool, the clamping length must be at least 10 mm.



To use sanding tools safely, please note the following information:


  • The sanding tips are approved for a maximum peripheral speed of 50 m/s. The maximum permitted rotation speeds for various shaft lengths and diameters are specified in DIN 69170, which is based on EN 12413. Each packaging unit comes with an accompanying sheet that specifies the maximum permitted rotation speeds of the tool. This must be strictly observed in order to prevent the shaft from bending during use.

  • The tools are fragile and must therefore be handled and transported with care. The tools must be stored in such a way that prevents them from being exposed to mechanical loads and harmful environmental influences.

  • Do not use damaged or broken sanding tips.

  • When using sanding tools, please observe the FEPA safety recommendations. Download: http://www.fepa-abrasives.org
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For use on machines with a flexible shaft drive as well as on straight grinders. For use on edges and for deburring work on steel construction parts and cast steel parts, as well as for removing burrs and for grinding of chamfers when preparing and post-processing weld seams.

Number of pieces in assortment/set

10 PCS

Material to be processed

Steel

Material of abrasive medium

Fused aluminium oxide

Binding

Ceramically bound

Assortment of specially fused alumina sanding tips, pink 10 pieces including:
1 x
Specially fused alumina sanding tip, pink

SNDTIP-KE2020-ABRASIVE-SHFTL6-D20-WL20

Description:
20 x 60 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
Specially fused alumina sanding tip, pink
1 x
Specially fused alumina sanding tip, pink

SNDTIP-KU16-ABRASIVE-SHFTL6-D16-WL16

Description:
16 x 56 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-SP1320-ABRASIVE-SHFTL6-D13-WL20

Description:
13 x 60 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-WK2025-ABRASIVE-SHFTL6-D20-WL25

Description:
20 x 65 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-WR2025-ABRASIVE-SHFTL6-D20-WL25

Description:
20 x 65 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-ZY1013-ABRASIVE-SHFTL6-D10-WL13

Description:
10 x 53 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-ZY1320-ABRASIVE-SHFTL6-D13-WL20

Description:
13 x 60 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-ZY2006-ABRASIVE-SHFTL6-D20-WL6

Description:
20 x 46 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
Specially fused alumina sanding tip, pink
1 x
Specially fused alumina sanding tip, pink

SNDTIP-ZY2012-ABRASIVE-SHFTL6-D20-WL12

Description:
20 x 52 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
1 x
Specially fused alumina sanding tip, pink

SNDTIP-ZY2030-ABRASIVE-SHFTL6-D20-WL30

Description:
20 x 70 mm
The professional tool made from specially fused pink alumina for universal use on steel and cast steel.
Quantity: 1 x
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information