Battery-powered LED work lamp Ergopower Mini 10W
Cordless LED work lamp Ergopower Mini 10 W
LAMP-CORDL-LED-LIION-10W-1000LM-W.PLG
Register now and access more than 125,000 products
SMD LED light source
Good thermal conditioning to support consistent light output
Two light modes
1,000 lm and 500 lm
Switch mode
Full light – low light - off
LED charging indicator
4 LEDs on the back side indicate the battery charging status
Charging
Via charging cable with USB-C connection
Can be used with tripod
Stand at back with M8 hole
Two strong magnets at stand
Additional installation method
Battery indicator
- Li-lon: 3.7 V, 16.28 Wh, 4,400 mAh
- Delivered with EU plug 5V 1A charger and USB-C cable
Datasheets(X)
Min. colour rendering index (CRI) | 70 |
Min./max. luminous flux | 500 / 1000 lm |
Colour temperature | 6000 K |
Min./max. luminous period | 3-6 h |
Charging time | 4.5 h |
Impact resistance | IK09 |
IP protection class | IP 67 |
Nominal voltage | 5 V/DC |
Rechargeable battery/battery capacity | 4400 mAh |
Type of rechargeable battery/battery | Li-lon |
Protection class | Protection class III/safety extra-low voltage |
Power rating | 10 W |
Min./max. operating temperature | -10 to 40 °C |
Width x height x depth | 144 x 100 x 45 mm |
Plug type | C |
Number of LEDs | 1 PCS |
Material | Plastic |
Last viewed
Machine setting tool
30-mm point chisel, hex.
General purpose gloves Synthex
Active glass cleaner
Round connector RSA 2 1.65
System assortment 8.4.1, socket wrench 3/8 + 1/4 inch 91 pieces
Serrated locking nut with locking teeth Steel strength class 8, zinc-plated, blue passivated (A2K)
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Aluminium handle 1,560 mm
WIT-AS anchor rod, zinc-plated steel for WIT-VM 250 injection systems