Welcome to Würth Latvia For trade customers only
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 1
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 2
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 3
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 4
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 5
Concrete screw with female thread W-BS/S - CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35 - 6

Concrete screw with female thread W-BS/S

Concrete screw W-BS type I zinc plated steel
CONCSCR-(W-BS/I)-(A2K)-SW13-M8/M10-6X35

Art.-no. 5929176001
EAN 4046777685688
All versions
Prices for customers after login
Concrete screw with female thread W-BS/S

Art.-no. 5929176001

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Highest load capacities and efficient mounting. For suspensions and fittings with threaded rods (female thread M8/M10), zinc-plated steel
  • For anchorage in concrete and masonry

  • Extremely flexible application thanks to up to three effective anchorage depths

  • With sleeve and M8/M10 combination internal thread

  • High loads

  • Very low spacing and edge distances thanks to very low expansion effect

  • Very fast and easy installation, particularly overhead, and immediate load-bearing capacity

  • Fastening can be adjusted up to two times after installation (please refer to the installation instructions)
Proof of Performance

European Technical Assessment ETA-16/0043 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static and quasi-static action (dia. 6)

  • Seismic action, performance category C1 (dia. 6, tension load only)

  • Fire resistance R30, R60, R90, R120


European Technical Assessment ETA-23/0196 for anchorage in masonry


  • Static and quasi-static action (dia. 6)

  • Fire resistance R30, R60, R90, R120 (dia. 6)


European Technical Assessment ETA-16/0128 for anchors in a redundant non-structural system:


  • Cracked and uncracked concrete, (dia. 6)

  • Hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

  • Fire resistance R30, R60, R90, R120
Notice

When installing with a tangential impact driver, the recommended maximum nominal torque must be observed. The maximum installation torque specified must be observed when installing the fixtures. When used in masonry, the stone-specific installation data according to ETA-23/0196 must be observed.

Application area
Pipe suspensions

Adjustment - subsequent aligning possible

Create the drill hole

Clean the drill hole

Place screw

Screw in the screw

Considered installed when the head is close fitting

Screw out the screw max. 2x each by max. 10 mm. Underlay. Screw in

Considered installed when the head is close fitting. Lining max. 10 mm. The required embedment depth must be maintained as a minimum

Locate the tensioning strand

Mark the tensioning strand and locate the next one

Mark the tensioning strands. Specify the drilling range

Create the drill hole. Observe spacing

Clean the drill hole

Screw in the screw

Considered installed when the head is close fitting. Observe the embedment depth/mirror thickness

European Technical Assessment ETA-16/0043 for individual fixing point, option 1, cracked and uncracked concrete:


  • Static and quasi-static action (dia. 6)

  • Seismic action, performance category C1 (dia. 6, tension load only)

  • Fire resistance R30, R60, R90, R120


European Technical Assessment ETA-23/0196 for anchorage in masonry


  • Static and quasi-static action (dia. 6)

  • Fire resistance R30, R60, R90, R120 (dia. 6)


European Technical Assessment ETA-16/0128 for anchors in a redundant non-structural system:


  • Cracked and uncracked concrete, (dia. 6)

  • Hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)

  • Fire resistance R30, R60, R90, R120
Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Application area

Anchorages in concrete, individual fixing point with approval (dia. 6):


In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete)



Anchors in a redundant non-structural system in concrete, with approval:


  • In normal weight concrete C20/25 to C50/60 (cracked and uncracked concrete, (dia. 6))

  • In hollow-core prestressed concrete ceilings C30/37-C50/60, (dia. 6)


Anchorages in masonry with approval (dia. 6):


  • In solid calcium silicate block and perforated block

  • In solid block masonry brick


The simplest solution for suspended installations with threaded rods in sizes M8 and M10. Very efficient fastening solution in concrete for numerous applications involving technical building equipment such as in sanitary, air-conditioning and electrical installations



Ideal for fastening medium loads in concrete and light to medium loads in masonry:


  • Fastening of e.g. single pipe and ventilation installations, suspended ceiling substructures, suspended cable and pipe trays

  • Fastenings subject to seismic activity in earthquake-prone areas (in concrete)

  • Fastenings subject to exposure to fire


W-BS/S (galvanised steel) may only be used in dry indoor room conditions



For use in concrete < C20/25 and pressure-resistant natural stone (without approval)

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details