Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-4,2X13
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 13 mm |
Head diameter (dk) | 8.1 mm |
Head height (k1) | 2.8 mm |
Internal drive | H2 |
Drill tip length (lp) | 3.7 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.5 mm |
Max. material thickness to be drilled through (metal) | 3.5 mm |
RoHS-compliant | Yes |
Last viewed
Pressure sprayer Solvent-resistant
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
34° half-head collated nails AN
JAMO®plus Spacing assembly screw for wood/wood
Tip For automatic centre punches
Sanding sponge
Silicone spray grease
Screwdriver slotted 3C handle with hexagon shank
1/2 inch socket wrench insert, metric
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head