Drilling screw, round head with collar and H cross recess pias®
pias steel zinc plated pan head H with flange
MOD. TRUSS HEAD PIAS 4,2X38 ZP
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
 | |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 38 mm |
Drill tip length (lp) | 3 mm |
Internal drive | H2 |
Min./max. material thickness | 1.75-3.0 mm |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSS DIN 338 type RN 130°
Triple square bit
System insert, plastic, 4.4.1
Wet/dry floor nozzle
Brake cylinder rubber grease
1/4" socket wrench insert For hexagon socket, metric
1/2" multi-socket wrench one tool for all applications
Alkaline battery Energizer Industrial
Chrome-plated suction pipe Made of metal for ISS and TSS series
3/8 inch socket wrench insert metric, hexagon, short