Formwork nail SN 105 With intended rupture point
Formwork nail SN 105
NL-FORMWRK-SN105-47MM
Register now and access more than 125,000 products
All nails are suitable for secondary attachments (without technical approval). The maximum tensile strength of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Shank diameter (Øds) | 3.7 mm |
Head diameter (Ø dk) | 5.0 mm |
Shaft length (SL) | 47 mm |
Suitable for paling-board thickness (Ld) | 22 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5, Hilti DX 6 |
Last viewed
Spade drill bit For wood
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel
1/4 inch socket wrench insert, metric short
Oil spray bottle plastic
1/2 inch impact socket wrench insert, power With integrated reinforcement ring for longer service life
Assortment of specially fused alumina sanding tips, pink 10 pieces
1/2" socket wrench insert For TX screws, short
Internal extractor, hexagonal, short
Two-ear clamps
Lever riveter HNG 26 N