Paint spray Special, clear lacquer

Name: Paint spray Special, clear lacquer
Brand: Würth
SKU: 0893351930

Clear lacquer, nitro-alkydal quality Special
CLRLACSPR-HIGHGLOSS-400ML

Art.-no. 0893351930

EAN 4065746801560

All versions

Similar products

Prices for customers after login

Paint spray Special, clear lacquer

Art.-no. 0893351930

Prices for customers after login

Quantity

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +371 67788996

High-quality nitro-alkydal quality at a high technical level

High-grade nitro-alkydal quality

Quick drying

Easy to apply

Very good coverage properties

Good coverage

Can be coated with all common primers, filler products and paint types

Quick-drying paint resin

Formula does not contain heavy metals

Drying time at 20°C

Dust-dry< 10 min.

Tack-free < 20 min.

Touch dry < 60 min.

Temperature-resistant up to +80°C

Notice

Storage temperature +15°C to +25°C and up to 60% rel. humidity. Optimum processing temperature is +20°C. No painting on surfaces coated with synthetic resin lacquers, as this can lead to lifting and rippling of the old paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Wide range of uses: Commercial vehicles, bodywork, radiators, window construction, steel construction etc. Recommended for repair work and parts painting. Solvent or water-based varnishes and sanded old varnishes are suitable surfaces.

Instructions

Shake can vigorously for approx. 3 minutes before use. The application surface must be clean, dry and free from grease. Remove rust and old loose paint, sand and prime surface. Spraying distance: 20-25 cm. Maintain a flash-off time of approx. 5 minutes between spraying passes.

Chemical basis	Nitroalkydale
Contents	400 ml
Colour	Transparent
Gloss level	High gloss
Design	Round nozzle
Dust-drying time	10 min
AOX-free	Yes
Min. flashing point	-4 °C
Density	0.75 g/cm³
Conditions to maintain shelf life from production	at 15°C to 25°C and max. 60% relative humidity
Shelf life from production	36 Month

Suitable glove:

Product

Description

Household glove

Description:

Permeation level: 1

Liquid-proof, premium-quality cleaning glove made from natural latex

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.