Plug for tyre repairs
Plug for tyre repairs
PLG-TYRREP-CAMEL-100MM-60PCS
Register now and access more than 125,000 products
- Quick and easy repair without disassembling the tyre
- Suitable for small punctures up to max. 6 mm
- After application, the maximum speed of 80 km/h must not be exceeded
An expert must remove the tyre, check its condition and carry out the final repairs as soon as possible.
Datasheets(X)
For temporary repair of tubeless vehicle tyres.
Look for and remove the penetrating object (if it is still in the tyre) and ensure that the tyre pressure is max. 1 bar.
Apply vulcanising cement to the rasp tool and work into the affected area using up and down motions. Repeat two or three times.
Position the tyre repair plug centrally on the inlet probe and apply vulcanising cement to the special tip.
Press the tyre repair plug into the damaged opening until the ends protrude by around 2 cm out of the tyre.
Rotate the insert probe by 90° and remove carefully. Cut off the end of the plug and pump the tyre up to a pressure of 2 bar.
Product weight (per item) | 1.000 g |
Last viewed
1/4-inch socket wrench insert hexagon, with magnet
Gloss seal
Ring bolts With wood screw thread, zinc-plated steel, blue passivated (A2K)
1/4-inch socket wrench insert hexagon, with magnet
Turnbuckle
1/4-inch socket wrench insert hexagon, with magnet
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Twist drill bit HSS DIN 338 type RN 118°
Carpet knife with slim, extremely robust metal handle
Internal lens for Solar