Rivet nut with small countersunk head and knurled shank
Small countersunk head sst A2 knurled shank open
RIVNUT A2 ROUND REDUCED M8
Art.-no. 0942830
EAN 4053479967592
Register now and access more than 125,000 products
- Rivet nuts combine two types of fastening: A blind rivet connection and an additional screw connection
- This primarily enables screw connections to be used in relatively thin-walled structural elements
The specified values relating to the maximum tractive force of the thread and the maximum tightening torque are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
 | |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M8 |
Length (l1) | 16.5 mm |
Head diameter (d1) | 12.0 mm |
Outer diameter (d2) | 10.9 mm |
Head height (k1) | 0.6 mm |
Min./max. grip range (s1) | 1.0-3.0 mm |
Tensile fracture load | 25000 N |
Shear-fracture load | 4400 N |
Drill hole diameter | 11.1 mm |
Shank detail | With knurled shank |
Head type | Countersunk head |
Design | Open |
Last viewed
VDE snipe nose pliers DIN ISO 5745, IEC 60900
Brake cylinder rubber grease
Thermal underwear set
Coil for induction heater IEG-1200 POWER
Tensioning washer For screw connections DIN 6796, A4 plain stainless steel
Lock plate DIN 5406, plain steel
Turnbuckle
Festoon bulb
Rivet nut steel galvanized, small countersunk head open
Assembly adhesive 5100