Rubber care spray

Name: Rubber care spray
Brand: Würth
SKU: 0890110

Rubber care spray
RBRCARE-300ML

Art.-no. 0890110

EAN 4050641404374

All versions

Similar products

Prices for customers after login

Rubber care spray

Art.-no. 0890110

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +371 67788996

Prevents door, bonnet and luggage compartment rubber seals from freezing in winter or becoming stuck due to ageing and heat

Rubber components remain supple

Freshens up colours

Does not attack painted and chrome parts

Notice

Extremely flammable aerosol. Do not smoke and keep away from ignition sources during use! Ensure sufficient ventilation.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For protecting car tyres, rubber floor mats, pedal lining, rubber bumper inlays, etc.

Contents	300 ml
Smell/fragrance	Characteristic
Chemical basis	Mineral oil
Colour	Yellow
Density/conditions	0.66 g/cm³ / at 20°C
Min. flashing point	-92 °C
Bio-degradable	No
Silicone-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 6

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.