Superglue Klebfix - SUPGLU-SUPERFAST-5G - 1

Superglue Klebfix - SUPGLU-SUPERFAST-5G - 2

Superglue Klebfix

Name: Superglue Klebfix
Brand: Würth
SKU: 08930900

Cyanoacrylate structural adhesive, Klebfix
SUPGLU-SUPERFAST-5G

Art.-no. 08930900

EAN 4045989980123

All versions

Specification

For bonding metal, plastic and rubber parts with and to each other in a matter of seconds

Clever special closure

Precise dispensing

The tips do not become clogged

Bonds in seconds

Immediate further processing possible

Fast repairs

Simple designs without additional fastening materials possible

High level of resistance to ageing and climatic conditions

Solvent and silicone-free

Proof of Performance

NSF registered, class P1, reg. no. 151993

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

Notice

It is advisable to wear safety gloves and safety goggles.

If surfaces are too dry or acidic, this will delay or prevent hardening, while higher levels of moisture and alkaline surfaces will have an accelerating effect.

Due to the vapour pressure of the liquid adhesive, slow curing excess product around the adhesive area may result in a white deposit (blooming effect). These are adhesive vapours that are hardening. These can be removed with e.g. isopropanol or acetone. However, it is important to note that the surfaces of the parts to be cleaned are also resistant to these solvents. Blooming can be prevented/reduced by using the adhesive economically and ensuring sufficient air humidity and ventilation in the work area.

		Klebfix	Klebfix Plasto	Klebfix Flex	Klebfix 4-in-1	Klebfix 4-in-1 Brush application	Klebfix GAN	Klebfix 2C
		089309 0893090 08930900 0893090030	0893091	0893092	0893423	0893094	0893403 08934031	0893093090
GRP	⚫	⚫1	–	–	⚫	⚫	⚫
EPDM	⚫	–	⚫	–	–	⚫	–
Rubber	⚫	–	⚫	⚫	⚫	⚫	⚫
Rigid foams	–	⚫1	⚫1	–	⚫1	⚫1	⚫
Neoprene	–	–	⚫	–	–	–	⚫
PE	–	⚫1	–	⚫1	⚫1	⚫1	⚫1
PMMA	–	⚫	⚫	⚫	⚫	l	⚫
Polyamide	–	–	–	–	–	–	⚫
Polycarbonate = PC	⚫	–	⚫	⚫	⚫	⚫	⚫
Polystyrene	–	⚫1	⚫1	⚫	⚫	⚫	⚫
PP	–	⚫1	–	–	–	⚫	⚫1
PTFE	–	⚫1	–	–	–	–	–
PU	–	⚫	–	–	–	–	⚫
PVC	–	⚫	⚫	⚫	⚫	⚫	⚫
Silicone	–	–	⚫1	–	–	–	–
Styrofoam	–	⚫1	⚫1	–	–	–	⚫
Painted surfaces	Painted surfaces	–	–	–	–	⚫	⚫	⚫
Wood and wood materials	Wood (MDF, chipboard)	–	–	–	⚫	⚫	–	⚫
	Laminated panels (Resopal, Ultrapas)	–	–	⚫	⚫	⚫	⚫	⚫
	Decorative panels	–	–	–	–	–	–	⚫
	Cork	⚫	⚫	⚫	⚫	⚫	⚫	–
Stone and construction materials	Concrete	–	–	–	⚫	⚫	⚫	–
	Bituminous surfaces	–	–	–	⚫	–	–	–
	Aerated concrete, gypsum, gypsum plasterboard	–	–	–	⚫	⚫	⚫	–
	Synthetic stone (Corian, Varicor)	⚫	–	⚫	–	–	–	⚫
	HPL	–	–	⚫	⚫	⚫	⚫	–
	Natural stone (marble, granite)	⚫1	–	⚫	–	–	⚫	⚫
	Stone	–	–	–	–	–	⚫	–
	Cemented fibreboards	–	–	–	⚫	⚫	⚫	–
Other	Enamel	⚫1	–	⚫	–	–	–	–
	Glass	⚫	–	⚫	⚫	⚫	⚫	⚫
	Fibre glass	–	–	–	⚫	⚫	–	⚫
	Mirror	⚫1	–	⚫	–	⚫	⚫	–
	Porcelain, ceramic, tiles	⚫	–	⚫	⚫	⚫	⚫	⚫
	Paper	–	–	⚫	⚫	⚫	⚫	⚫
	Cardboard	–	–	⚫	⚫	⚫	⚫	⚫
	Mesh	–	–	–	⚫	⚫	–	⚫
	Leather	–	–	–	⚫	⚫	–	–
Metal	Aluminium	⚫2	–	⚫2	⚫2	⚫2	⚫2	⚫
	Lead	–	–	⚫	⚫	⚫	⚫	–
	Stainless steel	–	–	⚫	⚫	⚫	⚫	⚫
	Copper	⚫	–	⚫	⚫	–	–	⚫
	Brass	–	–	⚫	⚫	–	–	⚫
	Steel/iron	⚫	–	⚫	⚫	⚫	–	⚫
	Zinc	–	–	⚫	⚫	⚫	⚫	⚫
Plastics	ABS	–	⚫	–	⚫	⚫	⚫	⚫
	1. With primer 0893 091 5 2. With activator 0893 301 20

NSF registered, class P1, reg. no. 151993

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application

Application area

Superglue for bonding metal, plastic and rubber parts with and to each other.

Instructions

The application surfaces must be clean, dry and free of grease. For pre-treatment, refer to the technical data sheet. Apply a thin, even layer of adhesive to just one of the surfaces to be adhered. Apply sufficient pressure to make the connection immediately, in order to ensure complete contact.

Technical information

Chemical basis	Cyanoacrylate acidic ester
Colour	Transparent
Density	1.06 g/cm³
Min./max. viscosity	70-120 mPas
Min. combined tension and shear resistance	15 N/mm²
Stretch capacity	2 %
Max. gluing gap size	0.1 mm
Min./max. temperature resistance	-30 to +80 °C
Min./max. temperature conditions	-30 to 80 °C
Min./max. processing temperature	5 to 35 °C
Silicone-free	Yes
Solvent-free	Yes
Shelf life from production/conditions	15 Month / at room temperature
Contents	4.7 ml
Weight of content	5 g

Tensile shear strength values in compliance with DIN EN 1465
Material		Typical tensile and shear strength values (N / mm²)
Steel	60−90 seconds	> 22
Aluminium	60−90 seconds	>
PA	20−30 seconds	8–12
PVC	20−30 seconds	10–20*
Polycarbonate	10−15 seconds	10–20*
POM	30−40 seconds	–
EPDM	5−9 seconds	> 10*
Neoprene	3−5 seconds	> 10*
*Material breakage

Set to the touch after
Aluminium / aluminium	60 to 90 seconds
SBR / SBR	2 to 4 seconds
Polycarbonate / polycarbonate	10 to 15 seconds
EPDM / EPDM	5 to 9 seconds
Curing speed is accelerated by using the activator