Toggle anchor W-KD with washer and hexagon nut, zinc-plated steel
Toggle fixing W-KD
DWL-(W-KD)-55-M8X100
Register now and access more than 125,000 products
- With large and variable effective length
- Fully pre-assembled
- The toggle anchor locks itself into the substrate
- The rotatable threaded rod allows each attachment point to be adjusted individually, e.g. when creating a slope
Drill the hole
Insert anchor until element tilts
Secure hook with nut
Datasheets(X)
- For fixtures in hollow walls, hollow ceilings, suspended ceilings and various sandwich elements
- Maximum point load on trapezoidal sheet metal ceilings for pipes = 0.8 kN /other fastenings = 1.0 kN
Anchor diameter | 8 mm |
Type description | W-KD |
Anchor length (l) | 100 mm |
Hole diameter in component (d Bau) | 9 mm |
Design | With washer and nut |
Nominal drill-bit diameter (d 0) | 20 mm |
Thread diameter (d thr) | 8 mm |
Max. attachment height (d a) | 55 mm |
Material | Steel |
Minimum cavity depth (h) | 75 mm |
Surface | Zinc plated |
Thread type | Metric thread |
Last viewed
Multi-purpose grease III
CA preparation unit size 2, regulator
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
1/4" multi-socket wrench insert bi-hex, multi profile
Slotted impact bit 5/16 inch
Allen key, hexagon socket short version
1/2 inch cardan joint
Double-sided hook and loop fastener strip
Closing mechanism for system case
Metric combination wrench with POWERDRIV®