Tyre foam

Name: Tyre foam
Brand: Würth
SKU: 0890121

Tyre care foam
TYRCAREFM-500ML

Art.-no. 0890121

EAN 4045989988624

All versions

Prices for customers after login

Tyre foam

Art.-no. 0890121

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +371 67788996

High-quality care product for tyre walls

Cleans, cares, protects

Simple to apply in a single step, thereby saving time

Does not need to be wiped off afterwards

Ideal before the tyres go into storage

Dust- and dirt-repellent

Does not attack paint, plastics, rubber and metals

Silk-matt gloss

Tyres look like new

Visually enhances, making it particularly suitable for demonstration vehicles

Optimum UV and ozone protection

Tyres are not bleached

Prevents parts becoming brittle and ageing cracks

Care foam

Economical application

Forms a stable foam on the tyre, which runs off after sinking down

AOX- and solvent-free

Notice

Do not spray on tyre treads, brake discs and brake drums. Contains silicone.

Please note: Do not spray the tread due to risk of skidding. Do not spray on tyres for two-wheeled vehicles, brake discs and brake drums.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

High-quality care product for tyre walls.

Instructions

Spray the foam evenly onto the tyre walls and leave it to dry. Re-wiping not required. Can also be used on wet tyres. Pre-clean briefly with heavy soiling.

Contents	500 ml
Product weight (per item)	573.500 g
Chemical basis	Alkaline surfactants, silicone oil
Smell/fragrance	Characteristic
Colour	White
pH value / conditions	9 / at 20°C
Density/conditions	0.919 g/cm³ / at 20°C
Shelf life from production	18 Month
AOX-free	Yes
Silicone-free	No
Bio-degradable	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 5

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.