Vernier callipers, digital
Digital vernier callipers Eco
CAL-DGT-(0-150MM)
Register now and access more than 125,000 products
- Measuring unit: Metric or inch, direct conversion
- LCD digital display 10 mm
- Data output RS 232 compatible
- Battery: 1.5 V silver oxide battery (SR44)
- Battery voltage monitor light on the display
- Automatic switch-off/5 min.
- Stainless steel, hardened and smoothed
- Measuring surfaces ground and lapped
- With locking screw
- Flat depth gauge
- Thread table on the reverse, depth gauge on the calliper
Delivered in plastic box.
Datasheets(X)
The callipers have two measuring arms on each side for measuring internal and external dimensions. The callipers also have a depth gauge that can be used e.g. for measuring bore holes. The callipers have a table on the reverse for looking up the diameter of core holes in thread cutting.
Absolute length measuring accuracy | 0.03 mm |
Max. length measuring range | 150 mm |
Length of jaw | 40 mm |
Last viewed
1/2 inch socket wrench insert, metric
Household glove
Square washer DIN 436, zinc-plated steel, blue passivated (A2K)
Sabre saw blade, wood, three stars, Multiblade
Silicone spray
Bolt M8 BFB 8 BFB 8 DIN EN 206
Jigsaw blade, construction, three stars For sandwich material
1/2-inch impact socket wrench assortment 8 pieces
Non-slip inserts Devisys
Machine tap HSCo NeoTap blue through hole DIN 371/376