Wax undercoating PLUS - UBS-WAX-PERMANENT-BEIGE-1000ML

Wax undercoating PLUS

Name: Wax undercoating PLUS
Brand: Würth
SKU: 0892079100

Wax underbody seal PLUS
UBS-WAX-PERMANENT-BEIGE-1000ML

Art.-no. 0892079100

EAN 4062856812172

All versions

Similar products

Individual price display after login

Wax undercoating PLUS

Art.-no. 0892079100

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate shop
Login/Register
Call customer service: +371 67788996

Wax-based coating compound containing solvents, cannot be painted over

Permanently elastic with self-healing effect

Paint-, rubber- and PVC-compatible

Resistant to spray water and salt water, weak acids and alkalis

Very high solids content

VOC reduced

Dust dry after 48 hours, then waxy

Yield: 876 g/1000 ml at 200 µm 0.28 litres/m2

Notice

Recommended dry layer thickness: At least 50 μm. Product must be stirred/shaken up before use! After application, turn the aerosol can upside down and spray until the valve is empty.

Application area

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For areas at risk of corrosion in bodywork such as sheet metal seams (folds, gaps, flanges), edges and surfaces. Excellent adhesion and very good stability on metallic surfaces

Instructions

Shake can well before use. The surface must be dry and free from rust, dirt or grease. Optimal spray distance 30 cm. Apply thinly. Operating pressure: 6 bar

Chemical basis	Wax
Contents	1000 ml
Weight of content	1095 g
Colour	Beige
Min. proportion of solids	80 %
Conditions for through drying	at 23°C, 50% relative humidity
Conditions for skin-formation time	at 23°C and 50% relative humidity
Min. skin-formation time	48 h
Drying time	120 h
Conditions for drying time	at 23°C and 50% relative humidity
Density	1.095 g/ml
Density conditions	at 20°C
Shelf life from production	12 Month
Min. temperature conditions	-30 °C

Required accessory:

Product

Description

Quantity

Price
/PU

Undercoating spray gun

UBSSPRGUN-R1/4IN-BOTTLE-1LTR

Art.-no. 08911063

For applying stone chip and underseal products containing solvents.

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Disposable nitrile grip glove

Description:

Permeation level: 2

Unique, diamond texture for optimal grip

Vinyl chemical and moisture protective glove

Description:

Permeation level: 3

Fully dipped protective glove with vinyl coating on cotton jersey lining

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 5

Disposable nitrile glove

Description:

Permeation level: 2

Liquid-proof, food-safe disposable glove

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.