Wire cable holder
SUSPSYS-CBLMNT-HOLD-(1,5-2-2,5MM)
Register now and access more than 125,000 products
Cradle to Cradle® Certified
Our "Cradle to Cradle Certified" products conserve resources and are low in harmful substances. The standard assesses the safety, recyclability and pollutant content of materials in the end product. The main focus here is on conserving resources, e.g. by using recycled material in the manufacturing process.
Can be adjusted without tools
During installation, the wire rope must have a minimum protrusion of ≥ 50 mm (5 cm) from the holder after being fed through it. This guarantees secure clamping action and allows for visual inspections. Shorter protrusions can impair the retention force.
Note the following during installation: For inclined suspension, the angle of the wire rope to the vertical must not exceed 60°.
Datasheets(X)
Permissible load | 0.7 kN |
Material | Die-cast zinc |
Suitable for min./max. rope diameter | 1.5-2.5 mm |
Product weight (per item) | 20.600 g |
| Wire diameter | Max. load |
| 1.5 mm | 35 kg |
| 2 mm | 60 kg |
| 2.5 mm | 70 kg |
| 3 mm | 115 kg |
Last viewed
Pneumatic staple/nail gun DKN 3065 combination
Compressed air spray
Sharpie Ultra marker pen
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
BOLTEX rust remover
Deburring blade, E series
WÜRTH MODYF NATURE trousers
Adapter 1/2"
System insert, plastic, 4.4.1