Injector-Ex injector solvent

Name: Injector-Ex injector solvent
Brand: Würth
SKU: 0893300250

Injector solvent Injector-EX
INJSOLV-(INJECTOR-EX)-250ML

Art.-no. 0893300250

EAN 4046777772234

All versions

Individual price display after login

Injector-Ex injector solvent

Art.-no. 0893300250

Individual price display after login

Quantity

x 1 pcs

Exclusively for trade customers

Locate shop
Login/Register
Call customer service: +371 67788996

Mineral oil free injector and spark plug solvent with KENA^® microfluid formula.

Special product for loosening injectors and spark plugs in assemblies and engines

Gentle, since seized connections are loosened without considerable force or tools

Product can remain effective over an extended period, penetrate deeply and thus ensure optimal work results

KENA^® microfluid technology

Very good creeping properties allow deep penetration of the product

Even injectors and spark plugs with significant carbon build up are loosened efficiently

Slow flash-off strengthens the effect, the rust is converted and carbon deposits dissolved

Very economical to use

Notice

Remove excess material or splashes immediately from sensitive and painted surfaces using a damp cloth. When diluted with water, the product loses its intense cleaning effect.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

Special product for loosening rusted and oxidised injection nozzles, injectors and spark plugs in engines and assemblies.

Contents	250 ml
Colour	Colourless
Smell/fragrance	Fruity
Chemical basis	Surfactants, ester
Shelf life from production	24 Month
Density	0.843 g/cm³
Density conditions	at 20°C

Suitable glove:

Product

Description

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 5

Disposable nitrile glove

Description:

Permeation level: 1

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 1

Unique, diamond texture for optimal grip

Vinyl chemical and moisture protective glove

Description:

Permeation level: 3

Fully dipped protective glove with vinyl coating on cotton jersey lining

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.