Separator
Separator tool
SEPRTL-SPNW155MM
Art.-no.
0714524155
EAN 4024835927215
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For separating stuck or thin races and gears
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Product information
Datasheets(X)
Last viewed
3/4" POWERDRIV® socket wrench insert metric, bi-hex
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Internal extractor, hexagonal, short
Sealing ring, copper, shape A
Chuck with lock nut
Hexagon socket bit
Triple square bit
Fire resistant foam Sealfire W350
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Insulated corrugated pipe