Yellow zinc plated 10 steel serrated flange nut Yellow zinc plated (A2C), fine thread for frame screws
NUT-FRMSCR-HEX-FLG-WS22-(A2C)-M16X1,5
Register now and access more than 125,000 products
- Fine-thread notched nut
- Thread pitch: 1.5 mm
Corrosion-resistant
Approximately 96 hours against base metal corrosion in accordance with DIN EN ISO 9227-NSS
Operating principle of the locking ribs:
During tightening, the locking ribs ensure that the counter-material wraps around the contact surface of the bolt. This causes plastic deformation, which hardens the surface. No significant settlement occurs once tightening is complete. The locking ribs limit the settlement of the fitting, thus reducing the loss of pre-stress force.
Datasheets(X)
 | |
Thread type x nominal diameter x pitch (D) | M16 x 1.5 |
Height (h1) | 15.6 mm |
Flange diameter (dc) | 31 mm |
External drive (s1) | WS22 |
Design | With flange |
Standards | WN 2639 |
Material | Steel |
Property class | 10 |
Surface | Zinc plated yellow |
RoHS-compliant | No |
Locking device operating principle | Ribs |
Locking function | Locking against self-loosening by mechanical interlocking |
Thread form | Fine pitch thread |
Last viewed
Oval/rigid adapter for dent lifter and pin puller
Insect remover with special foam formula
Plastic knock down
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
STRONG one-handed clamp
Lock washer S spring steel with mechanically applied zinc coating (≤ dia. 3.5 zinc-plated, blue passivated)
Distance screw wood TX25, sharp tip
3/8" connector
Pneumatic ratchet screwdriver DRS 1/2 inch
Welding goggles